Powrmatic VPx 35 kW Power Vented Gas Cabinet Heater
High Performance, Small Footprint
Introducing the all new Powrmatic VPx power vented, gas fired, cabinet heater. Powrmatic have taken the already popular VPC heater and given it a fantastic makeover.
The new Powrmatic VPx cabinet heater is more compact than its predecessor. It packs more heat from a smaller foot print and offers lower NOx output. The new Powrmatic VPx range is also fully ErP compliant. Finished in a charcoal grey colour, stone baked enamel for a hard durable finish.
The all new Powrmatic VPx power vented gas cabinet heaters have been designed with both the installer and end user in mind. The heater has shrunk in size, taking up even less floor space than the previous version.
To meet ErP legislation, the VPx now comes with a high / low burner as standard. Fully modulating burner is also a factory option.
There are now six heaters in the range, with heat outputs from 35 kW up to an all new 140 kW model. Powrmatic have listened to customers and installers and added a higher power unit to the range.
The combustion circuit has been improved, with the addition of an easy change flue fan. Changing the heater between horizontal and vertical flue is now a breeze. Improvements to the pressure switch circuit will improve reliability and prevent moisture forming in the venturi tube.
Using standard Powrmatic flue, the Powrmatic Vpx can be installed with a single flue pipe or fully room sealed.
The Powrmatic VPx range of heater took the VPC and offered great improvements. Users and installers familiar with the VPC heater will find themselves at home with this new product.
With legislation part of the design brief, annual seasonal efficiencies are way above target. Use of the Powrmatic patented “NOx Reduction” swirl system provided ultra low NOx outputs in flue gases.
Prices shown are for the Vpx UF – Upright Free Blowing (With Air Nozzles)
For other models or factory options, please contact us.
• VPx UF – Upright Free Blowing Unit
• VPx UD – Upright Ducted Unit
For The Installer
• New fold out electrical panel to make wiring easier
• New compact construction, reducing installation space
• Low level horizontal flue option
• Flue only or room sealed flue systems
• All units are power fan assisted
• Site interchangeable top or side flue/combustion air spigot positions – improved design
• Plain side panel option – provides greater flexibility for ducted air
• Extended heads readily available when required
• Factory fitted MC200 & pre wired controls supplied as standard
• Galvanised chassis and panels options for the horticultural sector
• More than sixty years experience in warm air
• Two year parts and one year labour guarantee
• Ten year sliding scale time related heat exchanger warranty
The Powrmatic Vpx has a new design, fold out control panel. All wiring terminals and components are now reached easier and quicker. As the wiring panel is moved the entire burner module is easily available for service and maintenance.
The Powrmatic VPx comes pre wired with an MC200 time and temperature controller. Offering a 7 day timer, and optimised start. The MC200 can control standard high / low burners and fully modulating if required. The internal temperature sensor can easily be moved. Empty sensor boxes are available for a remote option if you require it. The MC200 controller provides maximum efficiency and lowers fuel use.
The Powrmatic VPx has been reduced in overall size, offering a greater choice and flexibility for installation. High quality construction includes redesigned corner posts and panels. Lower panels can be replaced as necessary for ducted air when required. A range of dampers and filters will soon be available.
One of the problems with the old VPC was the limited range of heat outputs. By offering an 140 kW option, the Powrmatic VPx now fills a gap that was requested by installers and customers
The Powrmatic VPx heat exchanger is of exceptionally modern design. Each tube comprises of four full passes through the air stream and each is carefully mechanically bent with swaged and crimped ends to eliminate welding and thus associated issues during the manufacturing process. Custom heat exchangers can be produced in 409 and 316 grade stainless steel options for increased life in rough service conditions. Each tube is fitted with a Patented low NOx device, designed and developed by Powrmatic. A ten year sliding scale warranty as standard on the heat exchanger.
The horizontal flue option has been made easier, with a much lower output height. Improvements for the horizontal arrangement help to reduce expensive roof working.
The Powrmatic VPx utilises in-shot burners, carefully designed and matched to fire directly into each heat exchanger tube. The specialist burner assembly uses a manifold to hold the gas injectors and are supplied from a single gas valve. Separate ignition and ionisation probes are utilised and a Pactrol safety gas control provides an exceptionally high level of operational safety. The VPx heaters are supplied for use with natural gas (G20) as standard with an LPG Propane (G31) option available with a factory or site conversion.
Each Powrmatic VPC cabinet heater contains a powerful centrifugal fan and motor in the base of the chassis. Free blowing heaters come complete with a top mounted lid and air distribution heads each containing adjustable louvers. Ducted models are supplied with an outlet spigot to enable hassle free connection of duct work. Optional air filter boxes and return air dampers are available
The entire range of Powrmatic VPC heater is supplied with automatic ignition and flame safety monitoring, high limit overheat protection and separate control of heat and fan to allow a summer operation mode
UK normal delivery charges are INCLUDED within this price, excluding Scotland & Ireland (contact us for additional costs). Lifting equipment is required to unload product at destination and should be arranged before delivery. Tail Lift delivery can be arranged at an additional cost if required.
PDF Brochure Download
Please click on the image below to download a brochure for the Powrmatic NVx range in PDF format.
PDF Brochure Download
Please click on the image below to download a brochure for the Powrmatic VPx range in PDF format.
VPx Product Range Brochure (PDF)
VPx User, Installation And Service Manual (PDF)
Please contact us for more details, or click here to visit the Powrmatic website.
Additional Product Images