Powrmatic LNVx V 40 kW Gas Fired Unit Heater
Downflow Unit – Axial Fans
The new Powrmatic LNVx V suspended range of unit heaters is ErP compliant and has undergone a total redesign from ground up including the striking charcoal grey colour scheme.
The Powrmatic LNVx V range features a reduced chassis size, allowing installation into the smallest of spaces without compromising output power or performance. The Powrmatic LNVx V shell has had a complete make over, now including additional structural folds to increase chassis strength and durability. Finished in a Charcoal Gray colour scheme using high quality polyester powder coat stove baked paint.
The LNVx V axial fans have newly developed anti-vibration mounts to further decrease noise and vibration compared to the older NVx range. Operating noise is heavily reduced.
The LNVx V heat exchanger design has further been improved allowing better heat transfer, improved airflow and is now suited to more applications than ever before. With each tube formed in a four pass profile of high quality aluminised steel and swaged ends preventing weld induced stress. Further factory options include both 409 and 316 graded stainless steel heat exchanger’s should the environment demand it.
The LNVx V electrical control panel has been moved from the bottom of the heater and folds out on an easy access chassis panel, making installation, service and maintenance easier than before. A unique plug and play configuration enables fast electronic replacement.
The Powrmatic LNVx V is the next generation unit heater, taking its predecessor the NVx through a total ground up redesign. Featuring Powrmatic’s unique patented NOx reduction system, users and installers can benefit from full compliance with the latest legislation on NOx levels and the entire range exceeds the requirements of the season efficiencies introduced in January 2018.
The Powrmatic LNVx V range remains cost efficient to purchase, install and operate in an increased range of applications.
The Powrmatic LNVx V range of gas fired unit heaters currently comprises of 12 different models, with heat outputs ranging from 15kW to 140kW. The unit heater is designed to be suspended directly in the work space that it will heat. Ducted versions are available with an up rated centrifugal fan option to overcome ducting resistance. The LNVx V can be supplied for use with Natural Gas (standard) or LPG (option). High low fire burner now supplied as standard or fully modulating gas valves available as a factory option.
Prices shown are for Powrmatic LNVx V – Axial Fan Downflow Units. Please contact us for factory options.
Current Models Available In The Range
• LNVx F – Axial Fan Crossflow Units
• LNVx V – Centrifugal Close Coupled Fan Units
• LNVx V – Axial Fan Downflow Units
• LNVx D – Ducted No Fan Unit
• LNVx V – Axial Fan Bi-Directional Units
For The Installer
• Low NOx levels and high seasonal efficiency fully 2018 compliant
• Redesigned for smaller footprint without compromising output power
• Engineered with additional case folds to improve strength
• Optimised heat exchanger
• Redesigned electrical chassis with fold out panel and plug and play electronics
• Anti vibration fan mountings reduce vibration and noise
• Down flow & Bi-Directional models available for increased air distribution options
• Flue fan can be easily rotated to offer rear exit flue or top exit flue
• Shorter pressure switch hose to eliminate water vapour from fan proving circuit
• Easy horizontal flue with wall terminal eliminating roof work
• Vertical flue where roof exit is required
• Fan assisted flue and full fresh air options available
• Upgrade option to centrifugal main fan for ducted applications
• Powrmatic – More Than Sixty Years Experience in Warm Air
• Made And Fully Assembled In The UK
• Two Year Parts And One Year Labour Guarantee
• Ten Year Heat Exchanger Warranty
• Proven Track Record, Exceptional Reliability
The Powrmatic LNVx V gas fired unit heaters are built around minimal fuel usage, efficiency and reduced flue gas emissions. The entire range meets or exceeds current Building Regulations and additional control options are available. Hi/Low fire offers a two stage operation and a fully modulating 0-10v control option is also available, ideal for use with enhanced time and temperature control stations or links to building management systems.
The heater chassis contains separate modules, one to contain the heat exchanger tubes and a second insulated compartment holding the main operating components including the gas valve, safety thermostat, combustion fan and burner assembly. The cabinet is finished in a heavy duty stove baked epoxy powder paint.
The Powrmatic LNVx V heat exchanger is of exceptionally modern design. Each tube comprises of four full passes through the air stream and each is carefully mechanically bent with swaged and crimped ends to eliminate welding and thus associated issues during the manufacturing process. Custom heat exchangers can be produced in 409 and 316 grade stainless steel options for increased life in rough service conditions. Each tube is fitted with a Patented low NOx device, designed and developed by Powrmatic. A ten year sliding scale warranty as standard on the heat exchanger.
The LNVx V utilises in-shot burners, carefully designed and matched to fire directly into each heat exchanger tube. The specialist burner assembly uses a manifold to hold the gas injectors and are supplied from a single gas valve. Separate ignition and ionisation probes are utilised and a Pactrol safety gas control provides an exceptionally high level of operational safety. The LNVx heaters are supplied for use with natural gas (G20) as standard with an LPG Propane (G31) option available with a factory or site conversion.
Air movement is provided by a standard axial fan arrangement with larger models utilising multiple fans. Adjustable louvre sections on the front of the heater allow the discharged heat to be directed to the required location in the work place. Additional horizontal louvres can be added for even greater air control.
The duct mounted version of the LNVx V heater is supplied with a heavy duty centrifugal fan fitted directly to the heater. The front discharge grill is replaced with a heavy duty duct spigot to allow direct mounting to the air distribution duct.
The entire range of Powrmatic LNVx V heater is supplied with automatic ignition and flame safety monitoring, high limit overheat protection and separate control of heat and fan to allow a summer operation mode. The LNVx V unit heater can be interfaced to almost any control station including the Powrmatic MC200, MC300 (forthcoming) and the Heatmiser IQ+ controllers.
MC200, MC300 and Heatmiser IQ+ provide the optional signals for hi/low operation and 0-10v modulating control as required. Control stations are not supplied as standard and require on site installation.
The range of Powrmatic LNVx V heaters are type tested to meet the stringent requirements the Gas Directive and are CE approved.
UK normal delivery charges are INCLUDED within this price, excluding some areas of Scotland & Ireland (contact us for additional costs). Lifting equipment is required to unload product at destination and should be arranged before delivery. Tail Lift delivery can be arranged at an additional cost if required.
PDF Brochure Download
Please click on the image below to download a brochure for the Powrmatic LNVx V range in PDF format.
LNVx V Product Range Brochure (PDF)
LNVx User, Installation And Service Manual (PDF)
Please contact us for more details, or click here to visit the Powrmatic website.