Powrmatic CPx 30kW Oil Fired Cabinet Heaters
The Powrmatic CPx range of cabinet heaters include 13 models with heat outputs from 30kW to 586kW.
Powrmatic CPx heaters can be supplied in either upright or horizontal configurations and are designed to be installed directly into the space to be heated.
Optional models are available for externally mounting with weatherproof covers, or ducted models can be located directly into plant rooms.
All heaters have high / low burners as standard. 0-10v fully modulating burners are available as a factory option.
LPG versions can be supplied factory configured.
Prices shown are for standard upright free blowing units. Please contact us for factory options.
All cabinet heaters are now fitted with internal MC200 controller.
Current Models Available In The Range – Contact Us For Other Models
• CPx UF – Upright Free blowing
• CPx UD – Upright Ducted
• CPx HF – Horizontal Free blowing
• CPx HD – Horizontal Ducted
• CPx EA – External
Designed without Limitation
• New models with overall reduced footprint
• Easy to install and commission
• Full blank side panels for tight wall mounting
• Factory fitted MC200 controller to internal models
• Free blowing with extended heads
• Ducted versions available with up rated main fan motor
• Full stainless steel heat exchangers as standard
• Flue Tee piece supplied with heater for easy assembly
Caring For The Environment
• Fully ErP compliant
• Low NOx levels and high seasonal efficiency
• High efficiency models with low emissions
• Bio fuel options (contact Powrmatic technical department)
• Powrmatic – More Than Sixty Years Experience in Warm Air
• Made And Fully Assembled In The UK
• Two Year Parts And One Year Labour Guarantee
• Ten Year Heat Exchanger Warranty
• Proven Track Record, Exceptional Reliability
Powrmatic CPx heaters are matched to Riello pressure jet oil and forced draught gas burners. Oil fired heaters are supplied with a factory fitted fire safety valve and filter. Riello burners provide clean burning with low emissions and give exceptional reliability in service. Gas fired units are certified for use on Natural Gas and Propane. Oil fired units are supplied as standard for use with 35sec fuel oil and can be optionally factory supplied for use with 28sec.
Riello burners should only be used with a bio content of up to 10% to comply with Riello guidelines and warranty. For fuels using a higher bio content, this should be discussed prior to purchase.
The heat exchanger begins with a fully rolled and welded combustion chamber made from 430 stainless steel. This is then close coupled to the two pass heat exchanger containing circular tubes. The heat exchanger is assembled from separate modules to compensate for expansion rates without damaging the construction of the heat exchanger. The circular tubes are hydraulically pressed into place to alleviate welding stress and the issues that this can cause. Powrmatic offer additional stainless steel options.
Each Powrmatic CPx cabinet heater contains a powerful centrifugal fan and motor in the base of the chassis. Free blowing heaters come complete with a top mounted lid and air distribution heads each containing adjustable louvers. Ducted models are supplied with an outlet spigot to enable hassle free connection of duct work. Optional air filter boxes and return air dampers are available
The Powrmatic CPx Cabinet is made of steel corner frame construction and steel panel construction complete with internal thermal heat protection and finished with a hard wearing epoxy powder coat stove baked paint. Now finished in a striking charcoal gray colour.
The entire range of Powrmatic CPx heater is supplied with automatic ignition and flame safety monitoring, high limit overheat protection and separate control of heat and fan to allow a summer operation mode. The CPx unit heater can be interfaced to almost any control station including the Powrmatic Powrtrol, MC200, MC300 (forthcoming) and the Heatmiser IQ+ controllers.
MC200, MC300 and Heatmiser IQ+ provide the optional signals for hi/low operation and 0-10v modulating control when required. MC200 Control stations supplied as standard and pre-wired ready for immediate use.
All Powrmatic heaters are type tested to meet the stringent requirements of the Gas Directive and are CE approved.
UK normal delivery charges are INCLUDED within this price, excluding some areas of Scotland & Ireland (contact us for additional costs). Lifting equipment is required to unload product at destination and should be arranged before delivery. Tail Lift delivery can be arranged at an additional cost if required.
PDF Brochure Download
Please click on the image below to download a brochure for the Powrmatic LNVx range in PDF format.
CPx Product Range Brochure (PDF)
CPx User, Installation And Service Manual (PDF)
Please contact us for more details, or click here to visit the Powrmatic website.