Powrmatic NVx Duo 90kW Gas Fired Unit Heaters
The Powrmatic NVx Duo range of gas fired unit heaters currently comprises of 3 different models, with heat outputs ranging from 90kW to 140kW. The unit heater is designed to be suspended directly in the work space that it will heat. The NVx Duo can be supplied for use with Natural Gas (standard) or LPG (option). Various burner control options allow for basic on/off operation, high low fire or fully modulated heat outputs.
Prices shown are for Powrmatic NVx Duo (Standard Axial) units. Please contact us for factory options.
Current Models Available In The Range
• NVx F – Axial Fan Crossflow Units
• NVx Duo – Axial Fan Bi-Directional Units
• NVx V – Axial Fan Downflow Units
• NVx C – Centrifugal Close Coupled Fan Units
• NVx D – Ducted Heat Module (no fan)
For The Installer
• New compact model offers reduced installation profile and safer handling
• Down flow & Bi-Directional models available for increased air distribution options
• Flue fan can be easily rotated to offer rear exit flue or top exit flue
• Easy horizontal flue with wall terminal eliminating roof work
• Vertical flue where roof exit is required
• Fan assisted flue and full fresh air options available
• Upgrade option to centrifugal main fan for ducted applications
• Powrmatic – More Than Sixty Years Experience in Warm Air
• Made And Fully Assembled In The UK
• Two Year Parts And One Year Labour Guarantee
• Ten Year Heat Exchanger Warranty
• Proven Track Record, Exceptional Reliability
Powrmatic NVx Duo
The Powrmatic NVx Duo gas fired unit heaters are built around minimal fuel usage, efficiency and reduced flue gas emissions. The entire range meets or exceeds current Building Regulations and additional control options are available. Hi/Low fire offers a two stage operation and a fully modulating 0-10v control option is also available, ideal for use with enhanced time and temperature control stations or links to building management systems.
The heater chassis contains separate modules, one to contain the heat exchanger tubes and a second insulated compartment holding the main operating components including the gas valve, safety thermostat, combustion fan and burner assembly. The cabinet is finished in a heavy duty stove baked epoxy powder paint.
The Powrmatic NVx Duo heat exchanger is of exceptionally modern design. Each tube comprises of four full passes through the air stream and each is carefully mechanically bent with swaged and crimped ends to eliminate welding and thus associated issues during the manufacturing process. Custom heat exchangers can be produced in 409 and 316 grade stainless steel options for increased life in rough service conditions. A ten year sliding scale warranty as standard on the heat exchanger.
The NVx Duo utilises in-shot burners, carefully designed and matched to fire directly into each heat exchanger tube. The specialist burner assembly uses a manifold to hold the gas injectors and are supplied from a single gas valve. Separate ignition and ionisation probes are utilised and a Brahma safety gas control provides an exceptionally high level of operational safety. The NVx heaters are supplied for use with natural gas (G20) as standard with an LPG Propane (G31) option available with a factory or site conversion.
Air movement is provided by a standard axial fan arrangement with larger models utilising multiple fans. Adjustable louver sections on the front of the heater allow the discharged heat to be directed to the required location in the work place. Additional horizontal louvers can be added for even greater air control.
The duct mounted version of the NVx heater is supplied with a heavy duty centrifugal fan fitted directly to the heater. The front discharge grill is replaced with a heavy duty duct spigot to allow direct mounting to the air distribution duct.
The entire range of Powrmatic NVx heater is supplied with automatic ignition and flame safety monitoring, high limit overheat protection and separate control of heat and fan to allow a summer operation mode. The NVx unit heater can be interfaced to almost any control station including the Powrmatic Powrtrol, MC200, MC300 (forthcoming) and the Heatmiser IQ+ controllers.
Powrtrol stations provide basic time and temperature options whilst the MC200, MC300 and Heatmiser IQ+ provide the optional signals for hi/low operation and 0-10v modulating control when required. Control stations are not supplied as standard and require onsite installation.
The range of Powrmatic NVx Duo heaters are type tested to meet the stringent requirements the Gas Directive and are CE approved.
Powrmatic NVx Duo Delivery And Brochure
UK normal delivery charges are INCLUDED within this price, excluding Scotland & Ireland (contact us for additional costs). Lifting equipment is required to unload product at destination and should be arranged before delivery. Tail Lift delivery can be arranged at an additional cost if required.
PDF Brochure Download
Please click on the image below to download a brochure for the Powrmatic NVx range in PDF format.
Visit the Powrmatic Website For Further Details